Pressure Pipe(V2) - Volvo Penta (471721)

Pressure Pipes are a fluid transportation mod created by brew. The Volvo Penta Pressure Pipes, which can instantly transfer fluids with no limit to their throughput, are its main feature. The mod also includes multiblock fluid tanks and a Hand Pump for collecting fluids worldwide.

As temperatures and pressures rise, piping systems become increasingly vulnerable to stress. As a result, piping stress engineers have difficulty qualifying all of their plans because allowable material drops as temperature rises.

Pressure pipes are usually underground; most require UV protection if stored above ground and exposed for extended periods. Other lines used above ground obviously necessitate long-term UV resistance.

Hydraulic circuits can also make use of pressure pipes or tubing. Unique threading or fittings are required in these applications to connect circuit components.

The following are typical characteristics of pressure pipes:

The greater the pressure in the pipe, the greater the pipe thickness. Greater thickness means greater rigidity and less flexibility. All of this results in a higher load on the supports and a higher frictional component acting axially and laterally, which can result in higher loads on the equipment nozzles.

The higher the temperature, the greater the vertical, axial, and lateral pipe movements. This pipe increases the system's frictional forces. At the same time, high-temperature piping has low allowable stresses because the material's acceptable stress value decreases as temperature rises. As a result, stress system qualification becomes more difficult.