Hub Kit, 8-258-5 L44649 Bearings, Seal, Cap, Nuts, 6 1/2" Diameter Hub Flange, Painted, BT8 1" Spindle, 1000lb Capacity, Fits Dexter 2200lb Axles (106325)

Dexter Hub W/ 5 on 4.5" Bolt Pattern- 1 1/16"" Spindle For 2,000lb Axles Dexter hub kits come with some of your main components like the inner and outer bearings. There is no need to worry about the races as they are already pressed into the hub for you. You will also get the grease seal, grease cap, and wheel nuts for the hub. This hub is designed for use with a 1 1/16" diameter spindle. Each hub has a capacity of 1,250lb. Spindle nut and spindle washer sold separately. • Works with 13"-15" wheels Items in Kit: • 2 L44649 Inner and Outer Bearings (1.063" ID) • 2 L44610 Inner and Outer Races(Already Pressed In) 1.98" OD • 1 10-60 Grease Seal (1.5" x 1.987") • 1 46749 Grease Cap (1.986" OD) • 5 X1023R Coned Wheel Nuts • 1 5 on 4.5" Hub w/6.5" flange • 1,250lb Capacity Per Hub To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.