The ACCUSPRAYREFILL 1.3 MM (8-26583) from 3M is an Accuspray Atomizing Heads for 3M PPS Series 2.0 are designed to work exclusively with the 3M Accuspray ONE and PPS Series 2.0 Spray Cup systems. Applying low-, medium-and high-viscosity materials from one gun is very rapid and efficient, thanks to various replaceable heads. For on-demand spray gun performance, technicians remove and replace the head.
Key Features:
- For applying low- to high-viscosity coatings, various replacement atomizing heads are available.
- Allows you to spray primer, sealer, base, and clear coat all from the same gun.
- Quick and easy head change gives you the performance of a brand new spray gun whenever you need it.
- Thanks to the see-through design, it's easy to see when the heads are clean.
- 3M Accuspray ONE and PPS Systems are compatible.
- They are designed to provide improved protection as well as maximum comfort.
- Using cutting-edge technology, expertly constructed
- Designed to be of the highest quality and last a long time.
Product Specifications:
- SKU: 8-26583
- Weight: 0.13 LBS
- Product Type: Atomizing Head
- For Use With: PPS 2.0
- Additional Information: Green 1.3 mm
Replaceable Atomizing Heads for the 3M Accuspray ONE Spray Gun System with PPS Series 2.03M Accuspray Atomizing Heads for 3M PPS Series 2.0 deliver the ideal atomization to a wide range of fluids and coatings applied with Accuspray ONE Spray Guns. Atomizing heads are available in five sizes: 2.0 mm (red), 1.8 mm (clear), 1.4 mm (orange), 1.3 mm (green) and 1.2 mm (blue). For sealers, basecoats and topcoats, 3M recommends 1.3 mm or 1.4 mm atomizing heads. Choose the 1.8 mm size for higher-viscosity materials such as primer, and the 2.0 mm size for heavy-duty applications using fluids like gel coats, adhesives, undercoats or industrial coatings. Always refer to your paint companys recommendations. Fast, easy controls for fan diameter, fluid and air pressure on the Accuspray ONE gun allow for quick adjustment across jobs from spot repairs to full panel coverage requiring up to 12 vertical or horizontal spray patterns. Along with the distinctive color, the fluid tip size is presented clearly on each atomizing head for fast, accurate selection. Atomizing heads are see-through to make it easy for technicians to determine that the head is properly cleaned.All atomizing heads work with the 3M PPS Series 2.0 Spray Cup System a system of reusable paint cups and disposable lids and liners, so you can be done with cleaning paint cups forever. ONE gun ONE system for a complete range of applications. ONE System for Every Spraying NeedAn all-in-one solution for mixing/measuring, filtering and spraying of primer, sealer, base and clear coat, the 3M Accuspray ONE Spray Gun System with PPS Series 2.0 is a combination of convenience, versatility and efficiency. This system features the Accuspray ONE Spray Gun - a lightweight, composite spray gun body that is molded in one piece, eliminating the complexity, wear and cleaning of small parts and pieces. This gun body has been engineered for enhanced durability in automotive and industrial environments. The spray gun uses a series of replaceable, see-through atomizing heads which can be reused 5-10 times and then simply removed and replaced. This affords the performance of a brand new spray gun, on demand and at a fraction of the price.Next Generation of the 3M Paint Preparation System (PPS)The 3M PPS Series 2.0 Spray Cup System is the latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup, and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings. Cleanest Disposable Cup System Every PPS Series 2.0 lid features a ¼-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contains a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.Reduce Material Waste by Mixing in the Cup3M PPS Series 2.0 makes it even easier to mix directly in the cup. If youre mixing on a scale, use the max fill notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.Improved Fluid Flow for More Consistent Paint Application3M PPS Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration no assembly needed.More Confidence in the Connection to Your GunA new adapter design provides a four-point connection and a wider 360° platform to e
