3/8" X 25' FUEL HOSE (116-368-0385)

A plastic barrier veneer and an NBR outer layer tube prevent permeability in the Shields low permeation maritime gasoline hose. This polyester reinforced hose is weather- and UV-resistant and complies with the very low permeability requirements set forth by the EPA and CARB. This hose is primarily used to feed fuel, including all biodiesel blends, diesel, and gasoline with up to 85% ethanol. It complies with NMMA/CE type recognized norms, SAE J1527 Type A1-15, ISO 7840 type A1, and USCG type A1 - 15 regulations for recreational boats. The temperature is between -20 and 212 degrees Fahrenheit.

Key Features:

• I.D.: 3/8" (9.5mm), o.D.: 11/16" (17.27mm), and weight: 0.1 g 16, maximum WP: 100
• It has an NBR outer layer tube and a plastic barrier Veneer to stop permeation. The temperature fluctuates between -20 and 212 degrees Fahrenheit.
• The reinforced hose is resistant to weather and UV rays and conforms with EPA and CAR's very low permeability requirements.
• It is for fuel feed (diesel, all biodiesel blends, and gasoline with up to 85% ethanol mixtures)
• It meets the requirements of USCG type A1-15 for leisure boats. meets approved standards such as Saej1527 type A1-15, ISO 7840 type A1, and NMMA/CE type
• This product replaces 88-3680385, 808282266301, and 116-368-0385

Product Specifications:

• SKU: 16-368-0385
• UPC: 808282266301
• Weight: 5.04 LBS
• Unit Of Measure: EA
• Manufacturer Part Number (MPN): 116-368-0385
• Quantity: 1

Plastic barrier veneer with an NBR outer layer tube, polyester reinforced. Primarily used for fuel feed (gasoline up to 85% ethanol blended fuel/diesel/all bio-diesel blends) Meets USCG Type A1 – 15 requirements for pleasure boats and meets SAE J1527 Type A1-15, SO 7840 Type A1, and NMMA/CE type accepted standards

This product replaces:

88-3680385, 808282266301, 116-368-0385

This product replaces:

88-3680385, 808282266301, 116-368-0385