1/2" X 18" SURF. COND BELT (7000028454)

1/2" X 18" SURF. COND BELT (7000028454) from 3M is a dependable belt designed to perform detail work on a variety of metals, including blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and achieving straight line-brushed finishes.

1/2" X 18" SURF. COND BELT (7000028454) contains abrasive minerals like silicon carbide or aluminum oxide. Silicon carbide is a highly sharp synthetic material widely used in low-pressure applications like paint prep and finishing. Aluminum oxide is a hard, blocky mineral with a high cut rate and a long service life. While breaking down more quickly than aluminum oxide, Silicon carbide produces a more refined polish.

Key Features:

• Cleaning, blending, deburring, and finishing nonwoven surface conditioning belts.
• Reduced loading and heat build-up allowing longer run times and consistent surface conditioning outcomes
• In automated processing, conformability will enable abrasives to stay in contact with complex-shaped pieces.
• Detail work over contours and edges is more accessible with reinforced backing and nonwoven open web material.
• Surface flaws, grind lines, mill, and other marks are removed.

Specifications:

• Brand: 3M
• SKU: 8-08857
• Weight: 0.03 LBS
• Manufacturer Part Number (MPN): 7000028454

 Used in stainless steel finishingA Versatile Abrasive Scotch-Brite™ Surface Conditioning Belt work well to remove coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal.Ideal for Robotic FinishingWith a wide range of conformability options and high consistency, long-lasting Scotch-Brite™ industrial abrasives are a great option for robotic metal finishing. Scotch-Brite™ Surface Conditioning Belts can generate a spec-required, aesthetic finish when used in both manual and robotic processing.Choose the Right Belt for YouThe 3M offers a broad selection of belts to fit most any industrial belt sander. Wide belt sanders are used for sanding and finishing large wood panels. Medium-width belts fit onto edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors, and narrow belts are used with file tools in metalworking to access small areas or inside corners.  Blending and finishing stainless steelHard-Working Minerals: Aluminum Oxide and Silicon Carbide3M manufacture Scotch-Brite™ Surface Conditioning Belts with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.An Alternative for Wheels and DiscsBelt sanders are used for rapid grinding, sanding and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.Learn more about 3M™ Abrasives and Power Tools for Stainless Steel Finishing       

This product replaces:

71-08857, 50048011088575, 048011-08857